Fujitsu D1561 Motherboard


Specification

Graphics

BIOS Listing

Motherboard Manual


Specification

Top

Graphics

Top

D1561 System Board
 
Connectors on D1561 System Board
   
 
Board Layout
1 = Floppy Disk Drive
2 = Power On LED
3 = Front Panel
4 = Power Supply Control
5 = IDE Drives 3 / 4
6 = Power Supply
7 = IDE Drives 1/ 2
8 = Serial ATA2
9 = Battery
10 = Serial ATA2
11 = Dip Switch
12 = SMB
13 = LCD Front Panel
14 = Intrusion Switch
15 = USB E/F
16 = USB G/H
17 = Fan 2
18 = S/PDIF Connector
19 = Audio Front panel
20 =CD Audio In
21 = Additional Power Supply
22 = Serial Port COM2
23 = Fan 1

BIOS Listing

Top

<F1> Info
-/+ Select item / Change Values
F9 Setup Defaults
Esc Exit
Enter Select Menu / Execute Command
F7 Previous Values
Version 4.06 Rev 1.00.1561

Main

Normal Settings Alternative Settings
System Time:   HH:MM:SS  
System Date   MM:DD:YY  
Diskette A:   1.4M

None
360K
1.2M
720K

Serial ATA Configuration SATA Interface Enabled Disabled
  SATA Mode: Standard OS Only
  SATA Drive Mapping: PATA 1/2 + SATA 1/2  
IDE Drive 1:   SAMSUNG SC-148P(PM)  
IDE Drive 2:   None  
IDE Drive 3:   FX48++W-(SM)  
IDE Drive 4:   None  
Boot Options POST Errors Halt On All Errors No Halt On Any Errors
  Fast Boot Enabled Disabled
  Quiet Boot Enabled Disabled
  Primary Display AGP VGA PCI VGA
  Boot Menu Enabled Disabled
Boot Sequence   CD-ROM  
    Diskette  
    Hard Drive  
    Legacy Lan  
Base Memory   640k  
Extended Memory   510m  

Advanced

Normal Settings Alternative Settings
Peripheral Configuration Serial 1 Auto

Enabled
Disabled

  Serial 2 Auto

Enabled
Disabled

  Parallel Auto

Enabled
Disabled

  Parallel Mode ECP

Printer
Bidirection
EPP

  Diskette Controller Enabled Disabled
  Local Bus Ide Adapter Both

Disabled
Primary
Secondary

  Mouse Controller Auto Detect

Disabled
Enabled

  LAN Controller Enabled

Disabled

  LAN Remote Boot Disabled

PXE
BootP

  Audio Controller Auto Disabled
Enabled
PCI Configuration PCI IRQ Line 1:

Auto

Disabled
IRQ 3
IRQ 4
IRQ 5
IRQ 6
IRQ 7
IRQ 9
IRQ 10
IRQ 11
IRQ 12
IRQ 14
IRQ 15

  PCI IRQ Line 2:

Auto

  PCI IRQ Line 3:

Auto

  PCI IRQ Line 4:

Auto

  PCI IRQ Line 5:

Auto

  PCI IRQ Line 6:

Auto

  PCI IRQ Line 7:

Auto

  PCI IRQ Line 8: Auto
Advanced System Configuration PCI Bus Parity Checking Disabled Enabled
  Graphics Aperature 128MB 32,64,256MB
  USB Host Controller Enabled Disabled
  USB 2.0 Host Controller Enabled Disabled
  USB Legacy Support Disabled Enabled
  BIOS workspace location Expansion ROM area Top of base memory
Reset Configuration Data   No Yes
Lock Setup Configuration   No Yes

Security

Normal Settings Alternative Settings
Setup Password Not installed  
System Password Not installed

 

Set setup password Press enter

 

Setup password lock Standard

Extended

Set system password Press enter

 

System password mode System keyboard
System load Standard Diskette / CD rom lock
Setup prompt Enabled Disabled
Virus warning Disabled Enabled  
Diskette write Enabled Disabled  
Flash write Enabled Disabled  
Memorybird systemlock Disabled Enabled  
Hard Disk Security Disabled    

Power

Normal Settings Alternative Settings
APM Interface Enabled Disabled
APM Power Saving Customized

Disabled
Maximum Power Savings
Maximum Power Savings

Standby Timeout 15 min

Disabled, 2 min, 5 min, 10 min,30 min

Suspend Timeout Disabled

2 min, 15 min,30 min,1 h,2 h

Hard Disk Timeout 15 Min

Disabled, 2 min, 5 min, 10 min

APM Resume Timer Disabled Enabled
APM Resume Time hh:mm:ss  
ACPI Save to RAM Enabled Disabled
Power On/Off  

 

Power-On Source: BIOS Controller

ACPI Controlled

LAN Enabled

 

Wake Up Timer Disabled  
Wake Up Time 00:00:00  
Wake Up Mode Daily  
Power-Off Source:  

 

Software Enabled

 

Power Button Enabled  
Power Failure Recovery: Previous State Disabled, Always Off, Always On

Exit

Save Changes and exit
Discard Changes and exit
Get Default Values
Load Previous Values
Save Changes