D1961

Fujitsu D1961 Motherboard

Specification

Graphics

BIOS Listing

Motherboard Manual

SiS964 RAID User Manual

Specification

LGA775 Socket Intel® Celeron D/ Pentium® 4
SiS 661FX/964 Chipset
800/533MHz FSB
2 DIMM Slots (DDRAM)
- 1.8V, DDR400/333
- Max memory 2GB
- No ECC Support
Integrated SiS Real256E, 2D/3D Video Controller
Onboard RAID support (driver on DUCD)
Integrated Realtek, AC ‘97
- 1 x Line In
- 1 x Line Out
- 1 x Microphone
2 x SATA Controller
2 x IDE controller (max 4 IDe devices)
1 x AGP8x
3 x PCI Slots (32bit)
4 x USB 2.0 external ports (4 x internal)
ADMtek Fast Ethernet Controller with 10/100 MBit/s,
- WOL Support

Graphics

D1961 System Board

Connectors on D1961 System Board

Board Layout

1 = Power Supply
2 = Floppy Disk Drive
3 = IDE Drives 3/4
4 = Front Panel
5 = IDE Drives 1/2
6 = Battery
7 = SATA
8 = SATA
9 = USB
10 = USB
11 = FAN 2
12 = Audio In
13 = Audio Front Panel
14 = AdditionalPower Supply +12V
15 = Fan 1 CPU

BIOS Listing

Phoenix First BIOS Version 5.00 Rel 1.0
<F1> Info
-/+ Select item / Change Values
F9 Setup Defaults
Esc Exit
Enter Select Menu / Execute Command
F7 Previous Values

Main


		Normal Settings	Alternative Settings
System Time:		HH:MM:SS
System Date		MM:DD:YY
Diskette A:		1.4M	None 360K 1.2M 720K
Standard IDE:		CDROM
	PIO Mode	PIO 4
	DMA Mode	UDMA 7
	Firmware	xxxx
	Silent Mode	Medium	Silent, Disabled

Native IDE:		Maxtor 6Y080M0 - (TM)
	Maximum Capacity	80GB
	PIO Mode	PIO 4
	DMA Mode	UDMA 6
	Firmware	xxxx
	Silent Mode	Silent	Disabled, Medium

Boot Options:	POST Errors	Halt On All Errors	No Halt On Any Errors
	Fast Boot	Enabled	Disabled
	Quiet Boot	Enabled	Disabled
	Primary Display	AGP VGA	PCI VGA
	Boot Menu	Enabled	Disabled

Boot Sequence		CD-ROM Drive
		Diskette
		Hard Drive
		Legacy LAN Card
		BootManage UNDI, PXE-2.0
Base Memory		640k
Extended Memory		502m

Advanced


		Normal Settings	Alternative Settings
Peripheral Configuration:	Serial 1	Auto	Enabled Disabled
	Parallel	Auto	Enabled Disabled
	Parallel Mode	ECP	Printer, Bi Directional, EPP
	USB Host Controller	Enabled	Disabled
	USB 2.0 Host Controller	Enabled	Disabled
	USB Legacy Support	Disabled	Enabled
	ATA Controller Configuration:
	SATA Interface	Enabled	Disabled
	SATA Mode	Native	RAID, Compatible
	Primary IDE Channel	Enabled	Disabled
	Secondary IDE Channel	Enabled	Disabled
	Tertiary IDE Channel	Enabled	Disabled
	Quaternary IDE Channel	Enabled	Disabled
	Diskette Controller	Enabled	Disabled
	Mouse Controller	Auto Detect	Disabled Enabled
	LAN Controller	Enabled	Disabled
	LAN Remote Boot	Enabled	Disabled
	Audio Controller	Auto	Disabled Enabled

PCI Configuration	PCI IRQ Line 1:	Auto	Disabled IRQ 3 IRQ 4 IRQ 5 IRQ 6 IRQ 7 IRQ 9 IRQ 10 IRQ 11 IRQ 12 IRQ 14 IRQ 15
	PCI IRQ Line 2:	Auto
	PCI IRQ Line 3:	Auto
	PCI IRQ Line 4:	Auto
	PCI IRQ Line 5:	Auto
	PCI IRQ Line 6:	Auto
	PCI IRQ Line 7:	Auto
	PCI IRQ Line 8:	Auto
Advanced System Configuration	Graphics Aperture	64M	4,8,16,32,64,128,256
	PCI Bus Parity Checking	Disabled	Enabled
	BIOS workspace location	Expansion ROM area	Top of base memory
	Limit CPUID Functions:	Disabled	Enabled
	CPU Halt Mode (C1E)	Standard	Enhanced
	NX Memory Protection	Enabled	Disabled
	SMART Device Monitoring	Enabled	Disabled
	Fan Control	Enabled (fan controlled by CPU temp)	Disabled
Reset Configuration Data		No	Yes
Hyperthreading		Enabled	Disabled

Security


	Normal Settings	Alternative Settings
Setup Password	Not installed
System Password	Not installed
Set setup password	Press enter
Setup password lock	Standard	Extended
Set system password	Press enter
System password mode	System	keyboard
System password lock	WOL Skip
System load	Standard	Diskette / CD rom lock
Setup prompt	Enabled	Disabled
Virus warning	Disabled	Enabled
Diskette write	Enabled	Disabled
Flash write	Enabled	Disabled
Memorybird System Lock	Disabled	Enabled

Power


	Normal Settings	Alternative Settings
APM Interface	Enabled	Disabled
APM Power Saving	Customized	Disabled Maximum Power Savings Maximum Performance
Standby Timeout	15 min	Disabled 2 min 5 min 10 min 30 min
Suspend Timeout	Disabled	2 min 15 min 30 min 1 h 2 h
Hard Disk Timeout	15 Min	Disabled 2 min 5 min 10 min
ACPI Save to RAM	Enabled	Disabled
Safe Standby	Disabled	Enabled
System State Indicator	Standard	One LED
Power On/Off:
Power-on Source:	BIOS Controlled	ACPI Controlled
LAN	Enabled	Disabled
Wakeup Timer	Disabled	Enabled
Wakeup Time	hh:mm:ss
Wakeup Mode	Daily
Power-off Source:
Software	Enabled	Disabled
Power button	Enabled	Disabled
Power Failure Recovery	Previous State	Always Off, Always On, Disabled

Exit



Save Changes and Exit
Discard Changes and Exit
Get Default Values
Load Previous Values