Fujitsu D2030 Motherboard

Specification Graphics BIOS Listing Motherboard Manual SiS964 RAID User Manual

Specification

• AMD Athlon/AMD Sempron
  • AMD939 Socket
• SiS 761 Chipset
• FSB 2000MHz
• 4 DIMM Slots (DDR) - dual channel
  • 2.6V, DDR
  • Max memory 4GB
  • No ECC Support
• Integrated SiS761 Video Controller
  • up to 128MB shared memory
• Onboard RAID support (driver on DUCD)
  
• Integrated AC97 Audio Codec (Realtek ALC655)
  • 1 x Line In
  • 1 x Line Out
  • 1 x Microphone
• Slots
  • 1 PCIex16
  • 1 PCIex1
  • 2 PCI
• Integrated LAN - Realtek RTL8110 (10/100/1000)
• SATA Controller (no IDE support for hard drives)
  • supports up to 4 SATA drives (150MB/s)
• Supports up to 8 USB2.0
  • 4 rear
  • 2 front
  • 2 internal

Graphics

D2030 System Board
Connectors on D2030 System Board
D2030 Board Layout
BIOS Listing
Phoenix First BIOS Version 5.00 Rel 1.0 <F1> Info -/+ Select item / Change Values F9 Setup Defaults Esc Exit Enter Select Menu / Execute Command F7 Previous Values   Main Normal Settings Alternative Settings System Time:   HH:MM:SS   System Date   MM:DD:YY   Diskette A:   1.4M None 360K 1.2M 720K Standard IDE:   Samsung SP0812C-PM     Maximum Capacity 80GB     PIO Mode PIO 4     DMA Mode UDMA 6     Firmware xxxx     Silent Mode Disabled Silent, Medium   Password Status Not installed     Change Password [press enter]           Standard IDE:   NEC DVD RW     PIO Mode PIO 4     DMA Mode UDMA 2     Firmware xxxx     Silent Mode Medium Disabled, Silent   Password Status Not supported     Change Password [press enter]   Boot Options: POST Errors Halt On All Errors No Halt On Any Errors   Fast Boot Enabled Disabled   Quiet Boot Enabled Disabled   cME Video Mode 800x600 640x480, 1024x768, 1280x1024   Default Primary Display PEG PCI   Video Memory Size 32MB 64MB, 128MB   Boot Menu Enabled Disabled   PC Beep Volume High Low, Off Boot Sequence   CD-ROM Drive       Diskette       Hard Drive       Legacy LAN Card       BootManage UNDI, PXE-2.0   Base Memory   640k   Extended Memory   502m   Advanced Normal Settings Alternative Settings Peripheral Configuration: Serial 1 Auto Enabled Disabled   Parallel Auto Enabled Disabled   Parallel Mode ECP Printer, Bi Directional, EPP   USB Enable Ports All None, Internal   USB Host Controller Enabled Disabled   USB BIOS Supported Devices Auto None, All, Keyboard/Mouse   USB Boot Delay 0's     USB at Power Off Always On     ATA Controller Configuration:       SATA Mode Compatible Native, RAID, Auto Detect   Primary IDE Channel Enabled Disabled   Secondary IDE Channel Enabled Disabled   Tertiary IDE Channel Enabled Disabled   Quaternary IDE Channel Enabled Disabled   Diskette Controller Enabled Disabled   Mouse Controller Auto Detect Disabled Enabled   LAN Controller Enabled Disabled   LAN Remote Boot Enabled Disabled   Audio Controller Enabled Disabled, Auto           PCI Configuration PCI IRQ Line 1: Auto Disabled IRQ 3 IRQ 4 IRQ 5 IRQ 6 IRQ 7 IRQ 9 IRQ 10 IRQ 11 IRQ 12 IRQ 14 IRQ 15   PCI IRQ Line 2: Auto   PCI IRQ Line 3: Auto   PCI IRQ Line 4: Auto   PCI IRQ Line 5: Auto   PCI IRQ Line 6: Auto   PCI IRQ Line 7: Auto   PCI IRQ Line 8: Auto Advanced System Configuration Graphics Aperture 64M 4,8,16,32,64,128,256   BIOS workspace location Top of base memory  Expansion ROM area   Limit CPUID Functions: Disabled Enabled   HDD Host Protected Area (only if FirstWare option was purchased) Enabled Disabled   SMART Device Monitoring Enabled Disabled   Fan Control Enabled (fan controlled by CPU temp) Disabled Hyperthreading   Enabled Disabled Security Normal Settings Alternative Settings Setup Password Not installed   System Password Not installed   Set setup password Press enter   Setup password lock Standard Extended Set system password Press enter   System password mode System keyboard System password lock WOL Skip   SmartCard SystemLock SmartCard SystemLock Not installed   Install Single PC [press enter]   Install Group [press enter] Memorybird SystemLock Disabled Enabled cME Authentication Level (if FirstWare RecoverPro option purchased) High   System load Standard Diskette / CD rom lock Setup prompt Enabled Disabled Virus warning Disabled Enabled Diskette write Enabled Disabled Flash write Enabled Disabled ATA Vulnerability Protection Standard Enhanced Power Normal Settings Alternative Settings ACPI Configuration Enabled Disabled ACPI Save to RAM Enabled Disabled Safe Standby Disabled Enabled System State Indicator Standard One LED Power On/Off:     Power-on Source: BIOS Controlled ACPI Controlled LAN Enabled Disabled Wakeup Timer Disabled Enabled Wakeup Time hh:mm:ss   Wakeup Mode Daily   USB Keyboard Enabled Disabled Power-off Source:     Software Enabled Disabled Keyboard Disabled Enabled Power button Enabled Disabled Power Failure Recovery Previous State Always Off, Always On, Disabled Exit Save Changes and Exit Discard Changes and Exit Get Default Values Load Previous Values