MS-6323 Motherboard
Motherboard Manual is available for download (PDF, 581KB).
Mainboard Features
BIOS
Dimension
BIOS Information
BIOS (default Settings)
Enter the BIOS at Startup by hitting 'DEL' Key
This information was recorded from the reference machine
POST BIOS Message: (taken from 830-A70086 reference machine)
| Award Modular BIOS
v6.00PG Copyright (C) 1984-99, Award Software, Inc W6323F1 V1.1 052200 Main Processor: Pentium III 733Mhz(133x5.5)Memory Test:262144K DRAM CLK: 133MHz Award Plug and Play BIOS Extension v1.0A Copyright (C) 1998, Award Software, Inc. Detecting IDE Primergy Master .......Maxtor 33073U4 BAC51KJ0 Detecting IDE Primergy Slave......... None Detecting IDE Secondary Master... SAMSUNG DVD-ROM SD-612 BR03 Detecting IDE Secondary Slave......None Primary IDE channel no 80 conductor cable installed Press DEL to enter SETUP |
Bios Features Setup
| Standard CMOS Features | |
| Date | n/a |
| Time | n/a |
| IDE Primary Master | Press Enter xxxx MB |
| IDE Primary Slave | Press Enter None |
| IDE Secondary Master | Press Enter None |
| IDE Secondary Slave | Press Enter None |
| Drive A: | 1.44M, 3.5 in. |
| Drive B: | None |
| Video | EGA/VGA |
| Halt on | No Errors |
| Advanced BIOS Features ... | ||
| Settings | Default | Alternative Settings |
| Anti-Virus Protection: | Disabled | Enabled |
| CPU Internal Cache: | Enabled | Disabled |
| External Cache: | Enabled | Disabled |
| CPU L2 Cache ECC Checking | Enabled | |
| Processor Number Feature | Disabled | |
| Quick Power On Self Test: | Enabled | Disabled |
| First Boot Device | Floppy | LS/ZIP / HDD-0 / SCSI CD-ROM / HDD-1 / HDD-2 / HDD-3 / LAN / Disable |
| Second Boot Device: | CDROM | -- " -- |
| Third Boot Device: | HDD-0 | -- " -- |
| Boot Other Device: | Enabled | Disabled |
| Swap Floppy Drive: | Disabled | Enabled |
| Boot up Floppy Seek: | Disabled | Enabled |
| Boot up NumLock Status: | On | Off |
| Gate A20 Option | Fast | Normal |
| Typematic Rate Setting | Disabled | Enabled |
| Typematic Rate (Chars/Sec) | 6 | 8 / 10 / 12 / 15 / 20 / 24 / 30 |
| Typematic Delay | 250 | 500 / 750 / 1000 |
| Security Option: | Setup | System |
| OS Select For DRAM > 64MB: | Non-OS2 | OS/2 |
| Video BIOS Shadow | Enabled | Disabled |
| C8000-CBFFF Shadow | Disabled | Enabled |
| CC000-CFFFF Shadow | Disabled | Enabled |
| D0000-D3FFF Shadow | Disabled | Enabled |
| D4000-D7FFF Shadow | Disabled | Enabled |
| D8000-DBFFF Shadow | Disabled | Enabled |
| DC000-DFFFF Shadow | Disabled | Enabled |
| Advanced Chipset Features | ||
| Setting | Default | Alternative Setting |
| SDRAM Cycle Length | Auto | 3, 2 |
| DRAM Clock | Host CLK | HCLK-33, HCLK+33, Auto |
| Memory Hole | Disabled | Enabled |
| P2C/C2P Concurrency | Enabled | Disabled |
| Fast R-W Turn Around | Disabled | Enabled |
| System BIOS Cacheable | Disabled | Enabled |
| Video RAM Cacheable | Disabled | Enabled |
| AGP Aperature Size | 64M | 4M, 8M, 16M, 32M, 128M |
| AGP-4X Mode | Enabled | Disabled |
| AGP Driving Control | Auto | Manual |
| AGP Driving Value | DA | |
| OnChip USB | Enabled | |
| USB Keyboard Support | Disabled | Enabled |
| OnChip Sound | Auto | Disable |
| OnChip Modem | Auto | Disable |
| CPU to PCI Write Buffer | Enabled | Disabled |
| PCI Dynamic Bursting | Enabled | Disabled |
| PCI Master 0 WS Write | Enabled | Disabled |
| PCI Delay Transaction | Enabled | Disabled |
| PCI#2 Acess #1 Retry | Enabled | Disabled |
| AGP Master 1 WS Write | Enabled | Disabled |
| AGP Master 1 WS Read | Enabled | Disabled |
| Memory Parity/ECC Check | Disabled | Enabled |
| Integrated Peripherals | ||
| Setting | Default | Alternative Setting |
| OnChip IDE Channel0 | Enabled | Disabled |
| OnChip IDE Channel1 | Enabled | Disabled |
| IDE Prefetch Mode | Enabled | Disabled |
| IDE Primary Master PIO | Auto | Mode 0- 4 |
| IDE Primary Slave PIO | Auto | Mode 0- 4 |
| IDE Secondary Master PIO | Auto | Mode 0- 4 |
| IDE Secondary Slave PIO | Auto | Mode 0- 4 |
| IDE Primary Master UDMA | Auto | Disabled |
| IDE Primary Slave UDMA | Auto | Disabled |
| IDE Secondary Master UDMA | Auto | Disabled |
| IDE Secondary Slave UDMA | Auto | Disabled |
| Init Display First | AGP | PCI Slot |
| IDE HDD Block Mode | Enabled | Disabled |
| Onboard FDC Controller: | Enabled | Disabled |
| Onboard Serial Port 1: | Auto | 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Auto / Disabled |
| Onboard Serial Port 2: | Disabled* | 3F8/IRQ4 / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Auto |
| x UART 2 Mode | Standard | HPSIR, ASKIR |
| x IR Function Duplex | Half | Full |
| x TX,RX inverting enable | No, Yes | No, No / Yes, Yes / Yes, No |
| Onboard Parallel Port: | 378/IRQ7 | 278/IRQ5 / 3BC/IRQ7 / Disabled |
| Parallel Port Mode: | ECP | ECP+EPP / Normal / EPP / |
| x ECP Mode Use DMA | 3 | 1 |
| Parallel Port EPP Type | EPP1.7 | EPP 1.9 |
| Game Port (200-207H) | Enabled | Disabled |
| Power Management Setup | |||
| Settings | Default | Alternative Settings | |
| IPCA | Disabled | Enabled | |
| > Power Management: | PRESS ENTER | ||
| (2nd menu) | |||
| Power Management | User define | Min Saving, Max Saving | |
| HDD Power Down | Disable | 1 - 15min | |
| Doze Mode | Disable | 1min - 1 hour | |
| Suspend Mode | Disable | 1min - 1 hour | |
| ACPI Suspend Type | S1(POS) | S3(STR) | |
| PM Control by APM | Yes | No | |
| Video Off Option | Suspend -> Off | Always On , All Modes -> Off | |
| Video Off method | V/H SYNC+Blank | Blank Screen / DPMS Support | |
| Modem Use IRQ | 3 | NA, 4, 5, 7, 9, 10, 11 | |
| Soft-Off PWRBTN | Instant-Off | Delay 4 Sec | |
| State After Power Failure | Auto | On, Off | |
| LED in Suspend | Blinking | Single, Dual | |
| >Wake up Events | |||
| (2nd Menu) | |||
| VGA | OFF | ON | |
| LPT & COM | LPT/COM | None, LPT, COM | |
| HDD & FDD | ON | OFF | |
| PCI Master | OFF | ON | |
| PowerOn by PCI Card | Disabled | Enabled | |
| Wake Up On LAN/Ring | Disabled | Enabled | |
| RTC Alarm Resume | Disabled | Enabled | |
| date (of month) | 0 | ||
| Resume Time (hh:mm:ss) | 0 | ||
| Resume Time (hh:mm:ss) | 0 | ||
| Resume Time (hh:mm:ss) | 0 | ||
| > IRQs Activity Monitoring | |||
| (3rd Menu) | |||
| Primary INTR | ON | OFF | |
| IRQ3 (COM2) | Primary | Secondary, Disabled | |
| IRQ4 (COM1) | Primary | Secondary, Disabled | |
| IRQ5 (LPT 2) | Primary | Secondary, Disabled | |
| IRQ6 (Floppy Disk) | Primary | Secondary, Disabled | |
| IRQ7 (LPT 1) | Primary | Secondary, Disabled | |
| IRQ8 (RTC Alarm) | Disabled | Primary, Secondary | |
| IRQ9 (IRQ2 Redir) | Secondary | Primary, Disabled | |
| IRQ10 (Reserved) | Secondary | Primary, Disabled | |
| IRQ11 (Reserved) | Secondary | Primary, Disabled | |
| IRQ12 (PS/2 Mouse) | Primary | Secondary, Disabled | |
| IRQ13 (Coprocessor) | Primary | Secondary, Disabled | |
| IRQ14 (Hard Disk) | Primary | Secondary, Disabled | |
| IRQ15 (Reserved) | Disabled | Primary, Secondary | |
| PNP/PCI Configuration | ||
| Settings | Default | Alternative Settings |
| PNP OS Installed | Yes | No |
| Reset Configuration Data | Disabled | Enabled |
| Resources Controlled By | Auto(ESCD) | Manual |
| IRQ Resources | Press Enter | IRQ List 3 - 15 |
| DMA Resources | Press Enter | DMA List 0-7 |
| PCI/VGA Palette Snoop | Disabled | Enabled |
| Assign IRQ For VGA | Enabled | Disabled |
| Assign IRQ For USB | Enabled | Disabled |
| Frequency/Voltage Control | ||
| Settings | Default | Alternative Settings |
| Auto Detect DIMM/PCI Clk | Enabled | Disabled |
| Spread Spectrum | Enabled | Disabled |
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save and Exit Setup
Exit Without Saving