|
 |
|
| D1421 System Board | |||||||
|
|||||||
| Connectors on D1421 System Board |
|||||||
 |
|||||||
| Board Layout |
|||||||
 |
|||||||
|
|||||||
| <F1> Info -/+ Select item / Change Values F9 Setup Defaults Esc Exit Enter Select Menu / Execute Command F7 Previous Values |
|||||||
Main
| Normal Settings | Alternative Settings | ||
| System Time: | HH:MM:SS | ||
| System Date | MM:DD:YY | ||
| Diskette A: | 1.4M |
None |
|
| IDE Drive 1: | SAMSUNG SC-148P(PM) | ||
| IDE Drive 2: | None | ||
| IDE Drive 3: | None | ||
| IDE Drive 4: | None | ||
| Boot Options | POST Errors | Halt On All Errors | No Halt On Any Errors |
| Fast Boot | Enabled | Disabled | |
| Quiet Boot | Enabled | Disabled | |
| Primary Display | AGP VGA | PCI VGA | |
| Boot Menu | Enabled | Disabled | |
| Boot Sequence | ATAPI CD-ROM Drive | ||
| Diskette | |||
| Hard Drive | |||
| Legacy Lan Card | |||
| Base Memory | 640k | ||
| Extended Memory | 246m | ||
Advanced
| Normal Settings | Alternative Settings | ||
| Peripheral Configuration | Serial 1 | Auto |
Enabled |
| Parallel | Auto |
Enabled |
|
| Parallel Mode | ECP |
Printer |
|
| Diskette Controller | Enabled |
Disabled |
|
| Local Bus Ide Adapter | Both | Primary, Secondary | |
| Mouse Controller | Auto Detect |
Disabled |
|
| LAN Controller | Enabled |
Disabled |
|
| LAN Remote Boot | Disabled |
Enabled |
|
| Audio Controller | Auto |
Disabled, Enabled |
|
| PCI Configuration | PCI IRQ Line 1: |
Auto |
Disabled |
| PCI IRQ Line 2: |
Auto |
||
| PCI IRQ Line 3: |
Auto |
||
| PCI IRQ Line 4: |
Auto |
||
| PCI IRQ Line 5: |
Auto |
||
| PCI IRQ Line 6: |
Auto |
||
| PCI IRQ Line 7: |
Auto |
||
| PCI IRQ Line 8: | Auto |
||
| Advanced System Configuration | PCI Bus Parity Checking | Disabled | Enabled |
| Graphics Aperature | 64MB | 32,128,256MB | |
| USB Host Controller | Enabled | Disabled | |
| USB 2.0 Host Controller | Enabled | Disabled | |
| USB Legacy Support | Disabled | Enabled | |
| BIOS workspace location | Expansion ROM area | Top of base memory | |
| Power On/Off | Power Off Source | ||
| Software | Enabled | Disabled | |
| Keyboard | Disabled | Enabled | |
| Power Button | Enabled | Disabled | |
| Power On Source | Bios controlled | ACPI controlled | |
| LAN | Enabled | Disabled | |
| Timer | Enabled | Disabled | |
| Power Failure Recovery | Previous State |
Always Off, Always On, Disabled |
|
| Reset Configuration Data | No | Yes | |
| Lock Setup Configuration | No | Yes | |
Security
| Normal Settings | Alternative Settings | ||
| Setup Password | Not installed | ||
| System Password | Not installed |
|
|
| Set setup password | Press enter |
|
|
| Setup password lock | Standard |
Extended |
|
| Set system password | Press enter |
|
|
| System password mode | System | keyboard | |
| System load | Standard | Diskette / CD rom lock | |
| Setup prompt | Enabled | Disabled | |
| Virus warning | Disabled | Enabled | |
| Diskette write | Enabled | Disabled | |
| Flash write | Enabled | Disabled | |
| Memorybird Systemlock | Disabled | Enabled | |
| Smartcard systemlock | Disabled | Enabled | |
| Hard Disk Security: | |||
| Hard disk security | Enabled | Disabled |
|
| HDD 1 Security State | Not installed | ||
| Set HDD 1 Password | Press enter |
|
|
Power
| Normal Settings | Alternative Settings | |
| APM | Enabled | Disabled |
| Power Management Mode | Customized |
Disabled |
| Standby Timeout | 15 min |
Disabled |
| Suspend Timeout | Disabled |
2 min |
| Hard Disk Timeout | 15 Min |
Disabled |
| Resume On Time | Off | On |
| Resume Time | hh:mm:ss | |
| ACPI S3 | Enabled | Disabled |
Exit
| Save Changes and exit | |||
| Discard Changes and exit | |||
| Get Default Values | |||
| Load Previous Values | |||
| Save Changes | |||