(NLX form Factor)
ErgoPro e267
|
(NLX form Factor) |
|
| User Manual: | ErgoPro e267.pdf | |
|
Recovery CD Required: |
Win95: | Not Supported |
| Win98: | Drivers & Utilities CD 1.1 (You can also use Recovery CD 5.3) | |
| WinNT: | Drivers & Utilities CD 1.1 (You can also use Recovery CD 5.3) | |
Quick Specification
 |
|||
| Motherboard | MicroStar-6131 (NLX form factor) | ||
| Chipset | |||
|
North Bridge
|
Intel BX AGP (66/100 MHz FSB) | ||
|
South Bridge
|
Intel PIIX4E | ||
| Processor Support | |||
|
Celeron
|
Intel 300(A)MHz & 333MHz (Slot 1) | ||
|
Pentium II
|
350MHz, 400MHz & 450MHz | ||
| Memory | 2 * 3.3v DIMMS Slots | ||
| 32, 64 & 128MB Options (Max 256MB) | |||
| Non ECC / SPD (Serial Presence Detect) / Unbuffered / 4 clock lines | |||
|
Celeron
|
PC66 64-bit SDRAM | ||
|
Pentium II
|
PC100 64-bit SDRAM | ||
| IDE | DMA / 33MB/s & S.M.A.R.T | ||
| Hard Disk | Single 2.0GB (4500rpm) or 4.3GB(4500rpm) or 6.4GB(5400rpm) | ||
|
*
|
THERE IS NOT SPACE TO FIT A SECOND DRIVE IN THIS UNIT. | ||
| CD-ROM | Slim 24x (Optional) | ||
|
*
|
THIS CDROM IS FITTED WITH A COMBINED INTERNAL POWER & DATA CONNECTOR. | ||
| PCI | 2 * 32-bit / 33MHz PCI (1 shared with ISA) | ||
| PCI 2.1 Compliance | |||
| All Slots offer Bus Mastering | |||
| ISA | Single Shared Slot | ||
| LAN | Intel 82558 10/100Mb/s Controller | ||
|
Supports
|
Wake on LAN & PXE (Network boot) | ||
| Graphics | ATI 3D 2x Rage Pro Turbo (Onboard) | ||
|
RAM
|
4MB PC100 SGRAM (None upgradable) | ||
|
*
|
THERE IS NO AGP SLOT AVAILABLE | ||
| Sound | Yahama PCI YMF740 (Onboard) | ||
| TriTech TR82023 Audio Codec (AC97) | |||
|
Ports
|
|||
|
Front
|
2 * USB / headphone / Microphone | ||
|
Back
|
2 Serial Ports (16550 UARTS) / 1 Parallel / PS/2 KEYBOARD & Mouse | ||
| Audio In / Audio Out | |||
|
Chassis
|
|||
|
Size
|
86mm (Height) x 280mm (Width) x 360mm (Depth) | ||
|
Weight
|
|||
|
Power Supply
|
135W PSU | ||
| Management | |||
|
H/W Support
|
Winbond W83781 Hardware Monitor | ||
| Dual temperature monitors / FAN rotation / Voltage Monitoring | |||
|
BIOS Support
|
|||
|
Power
|
ACPI 1.0, APM 1.2 & PCI BIOS 2.1 | ||
|
Boot
|
BBS 1.01 & El Torito (CDROM) | ||
|
Plug & Play
|
PnP BIOS 1.0A | ||
|
Management
|
DMI 2.0 / ESCD 1.03 / SMBIOS 2.1 | ||
| Software | |||
|
Bundled Software
|
Windows 98 or Windows NT | ||
|
Recovery or Utility CD
|
F-Secure Virus Protection v4.01 | ||
| ProGuide & EasyGuide | |||
| Intel LanDesk Client Manager 3.3 | |||
| Intel LDCM Administrator 3.3 (Only on recovery CD) | |||
|
Accessories
|
WheelMouse / Headphones & Keyboard | ||
| FAQ | |
|
| 1. | Cannot read diskettes in floppy drive ? | |
| This can be caused by the FDD cable getting too near to a coil on the motherboard (Move away) | ||
| 2. | DMA Bus Master cannot be enabled for IDE & CD-ROM. | |
| Fixed in BIOS v1.2 | ||
| 3. | Audio drivers do not work. | |
| The Yamaha PCI Audio chip was changed from YMF740-V to YMF740-C. The C-revision drivers did not work with current drivers. | ||
| Drivers must be v4.05.1024 (Win98) and v4.00.6017 (WinNT 4.0) or newer. (Drivers are backwards compatible) | ||
| 4. | WOL did not work via LDCM 3.30 under windows 98 | |
| You must have v2.5 (or newer) of the Intel LAN drivers. Also enable WOL through LAN driver properties and in BIOS setup. | ||