ErgoPro e366
|
ErgoPro e366 |
| User Manual: | ErgoProe366.pdf | |
|
Recovery CD |
Win95: | Not Supported |
| Win98: | Recovery CD version 5.2 or Drivers & Utilities CD 1.1 | |
| WinNT: | ||
Quick Specification
 |
|||
| Motherboard | Gigabyte GA-6EMP | ||
| Chipset | |||
|
North Bridge
|
Intel EX AGP (66 MHz FSB) | ||
|
South Bridge
|
Intel PIIX4E | ||
| Processor Support | |||
|
Celeron NO L2 Cache
|
266 - 300MHz | ||
|
Celeron with L2 Cache
|
300A & 333MHz | ||
| Memory | 2 * 3.3v DIMMS Slots | ||
| 32, 64 & 128MB Options (Max 256MB) | |||
| Non ECC / SPD (Serial Presence Detect) / Unbuffered / 4 Clock Lines | |||
|
Celeron
|
PC66 64-bit SDRAM | ||
| IDE | DMA / 33MB/s & S.M.A.R.T | ||
| Hard Disk | 2.0 - 6.4GB | ||
|
*
|
THERE IS NOT SPACE TO FIT A SECOND DRIVE IN THIS
UNIT (EXCEPT IN EXTRA MEDIA BAY) |
||
| CD-ROM | (Optional) | ||
|
*
|
There are two 5.25 media bays in this machine | ||
| PCI | 2 * 32-bit / 33MHz PCI (1 shared with ISA) | ||
| PCI 2.1 Compliance | |||
| All Slots offer Bus Mastering | |||
| ISA | 8MHz Single Shared Slot | ||
| LAN | Not On-board | ||
| Graphics | ATI 3D 1x Rage Pro Turbo (Onboard) | ||
|
RAM
|
4MB PC100 SGRAM (None upgradable) | ||
|
*
|
THERE IS NO AGP SLOT AVAILABLE | ||
| Sound | Yamaha PCI YMF724E (Onboard) | ||
| AK4542 AC97 Audio Codec | |||
|
Ports
|
|||
|
Front
|
None | ||
|
Back
|
1 Serial Ports (2nd available on Motherboard) / 1 Parallel / PS/2 KEYBOARD & Mouse | ||
| Line In / Line Out / Microphone / MIDI-Joystick Port / 2* USB | |||
|
Chassis
|
|||
|
Size
|
360mm (Height) x 180mm (Width) x 350mm (Depth) | ||
|
Power Supply
|
90W PSU | ||
| Management | |||
|
H/W Support
|
No H/W Monitoring | ||
|
BIOS Support
|
|||
|
Power
|
ACPI & APM | ||
|
Plug & Play
|
PnP BIOS | ||
|
Management
|
DMI 2.0 & SMBIOS 2.1 | ||
| Software | |||
|
Bundled Software
|
Windows 98 or Windows NT | ||
|
Recovery or Utility CD
|
F-Secure Virus Protection v4.01 | ||
| ProGuide & EasyGuide | |||
| DMI (LDCM) | |||
|
Accessories
|
WheelMouse / Headphones & Keyboard | ||
| FAQ for e366 | |
|
| 1. | Poor sound level (or quality, i.e. distortion) through Line Out connector on the rear panel when using standard headphones. | |
| The Line Out on the rear panel is not amplified. Therefore it is recommended to be used with good quality active speakers. | ||