ErgoPro x565
|
ErgoPro x565 |
|
|
||
| User Manual: | X365QRG.pdf | |
|
Recovery CD |
Win95: | Not Supported |
| Win98: | Recovery CD version 5.1, 5.2, 5.3 | |
| WinNT: | ||
Quick Specification
 |
|||
| Motherboard | Fujitsu M63 | ||
|
AC41745
|
Onboard LAN + Graphics. No AGP Connector (Type Codes starting with: E2 & G2) | ||
|
AC41746
|
No onboard LAN + Graphics. With AGP Connector (Type Codes starting with: E3 & G3) | ||
| Chipset | |||
|
North Bridge
|
Intel 82443BX | ||
|
South Bridge
|
Intel 82371EB (PIIX4e) | ||
| Processor Support | |||
|
Pentium III
|
266, 300, 333, 350, 400 & 450MHz | ||
| Memory | 3 * 3.3v DIMM Slots | ||
| 32, 64 & 128MB Options (Max 384M) | |||
|
PC66
|
66MHz Unbuffered 64-bit SDRAM (266 - 333MHz Processor) | ||
|
PC100
|
100MHz Unbuffered 64-bit SDRAM (350 - 450MHz Processor) | ||
| IDE | Ultra Dma/33 | ||
| Hard Disk | 3.2, 4.3 or 6.4 GB | ||
|
*
|
|||
| CD-ROM | 24x | ||
| PCI | 32-bit / 33MHz PCI | ||
| PCI 2.1 Compliance | |||
| All Slots offer Bus Mastering | |||
| ISA | |||
| LAN | |||
| Graphics (Choice) | |||
|
1.
|
Onboard ATI 3D Rage Pro Turbo | ||
|
RAM
|
4MB PC100 SGRAM | ||
|
2.
|
ATI 3D Rage IIC | ||
|
RAM
|
|||
| Sound | Optional Sound (On x Motherboard) | ||
| CRYSTAL CS4235 | |||
|
Ports
|
|||
|
Front
|
|||
|
Back
|
|||
|
Chassis
|
|||
|
Size x565
|
430mm (Width) x 155mm (Height) x 454mm (Depth) | ||
|
Weight x565
|
20 kg | ||
|
Power Supply x365
|
200W ATX | ||
| Management | |||
|
H/W Support
|
|||
|
BIOS Support
|
|||
|
Power
|
|||
|
Plug & Play
|
|||
|
Management
|
|||
| Software | |||
|
Bundled Software
|
|||
|
Recovery or Utility CD
|
|||
|
Accessories
|
|||
| FAQ | |
|
| 1. | Poor sound level in recording via MIC under NT 4.0 ? | |
| Mute other channels while recording via MIC | ||
| 2. | In Windows NT the system does not work with two Matrox PCI graphics cards (On board ATI not used) ? | |
| Fixed in BIOS 1.13 | ||
| 3. | Warm (Soft) boot caused too short a reset for the STB velocity 4400 display adapters. After a warm boot, the bottom half of the DOS text rows were missing and the vertical size of the text shrinks ? | |
| Fixed in STB velocity 4400 add-in-cards video BIOS v1.13 | ||
| 4. | On board LAN did not work in every boot (cold boot) ? | |
| Fixed in BIOS 1.12 | ||
| 5. | If the supervisior password is set to 0 (i.e.Zero) in the ' password on boot' entry did not work, and system could boot without prompting for the password ? | |
| Fixed in BIOS 1.13 | ||