ErgoPro xD
|
|
The ErgoPro xD has a variety of Motherboards.
Please identify the correct model by examining the Product Code and Type
Code before proceeding
| Product Code | Type Code |
Motherboard
|
Features |
| D1 | A4E |
Fujitsu M80(xDi)
|
Intel 820 Chipset / Slot 1 / 2 DIMM / No AGP Slot |
| D2 | A4H |
Fujitsu M70 (xDp)
|
Intel 810e Chipset / Socket 370 / 2 DIMM / No AGP Slot |
| H2 | A4D |
Fujitsu M65E (xD)
|
Intel BX Chipset / Slot 1 / 2 DIMM / No AGP Slot |
| H1 | A4D |
Fujitsu M65 (xD)
|
Intel BX Chipset / Slot 1/ 2 DIMM / No AGP Slot |
Product Code = First 2 digits of the 12 digit code.
| General FAQ |  |
|
| 1. | The Bottom PCI Slot on my xD (M65/M65E) does not work ? | |
| The fourth slot is not used for anything at the moment as the 440BX chipset only supports 5 PCI slots of which 2 are already in use for the Network Card and Audio Chip. That leaves us with 3 available PCI slots. The fourth is there because we do not want to make two different riser cards as the Coming i820 (Camino) chipset does support 6 PCI slots and with that we have all 4 slots in use. In the current MB (xS xD) the lowest slot is disabled. | ||
| 2. | Why does my xD not power off when I shutdown Windows NT ? | |
| You need a special HAL (Windows NT Hardware Abstraction Layer Driver) to do this. You can download it here: HALxDxS.EXE | ||