Product Specification (Web View) teamserver C800i series
See also Catalogue Sheet CS-TS-0007

Features Processor Memory Input-Output Bus Architecture Standard Input-Output Subsystems RAID

Input-Output Ports Storage Bays Graphics as Standard Hardware Options Server Management Security

Operating System Support Approvals Operating Conditions Dimensions and weight Standard Warranty Server Configurations

	Features

	Processor
	C840ie - Intel® Pentium® III 450MHz processor C870i - Intel Pentium III 500MHz processor C870ie - Intel Pentium III 550MHz processor C870ix - Intel Pentium III 600MHz processor C800i-650 - Intel Pentium III 650MHz processor C800i-700 - Intel Pentium III 700MHz processor Intel BX Chipset, 100 MHz front-side bus Upgradeable to dual CPU operation

	Memory
	Maximum of 1GB 100 MHz registered ECC SDRAM

	Input-Output Bus Architecture
	Dual bus PCI/ISA Architecture : 3 dedicated PCI slots; 2 dedicated ISA slots; 1 dedicated AGP slot

	Standard Input-Output Subsystems
	PCI Ultra Wide SCSI controller integrated onto motherboard Integrated 10/100 Mbits/sec UTP PCI Wake-on-LAN Ethernet controller I2O ready architecture

	RAID
	Mylex AcceleRAID 250 (optional) Mylex eXtremeRAID 1100 Controller (opt. with Ultra-2 Disk Node)

	Input-Output Ports
	2 x 9-pin serial (COM) ports 1parallel (LPT) port. Supports standard and bi-directional operation (SPP, EPP, ECP) PS/2 mouse and keyboard ports 2 x USB ports

	Storage Bays
	3 x 5¼" format externally accessible device bays, 1 occupied with a 40x CD-ROM drive 5 internal disk bays, 1 occupied by the system disc 1 dedicated vertically mounted 3½" diskette drive Optional hot-swap cage occupying internal bays for up to 3 SCA Ultra2 SCSI discs Maximum storage: 5 x 18.2GB 68-pin Ultra-2 SCSI discs, or 2 x 18.2GB 68-pin Ultra-2 SCSI disk and 3 x 18.2GB Ultra-2 SCSI SCA discs with hot-swap cage, giving a total of 91GB

	Graphics as Standard
	AGP graphics controller card with 4MB video RAM

	Hardware Options
	All options separately orderable and configurable when available: Rack Conversion Kit 4.5GB Ultra Wide, 9.1GB and 18.2GB Ultra-2 SCSI 7200 RPM SCSI 68-pin hard disc drives (with carriers for 5¼" bays) 9.1GB, 18.2GB Ultra-2 SCSI 7200 RPM or 10000 RPMSCA hard disc drives if optional hot-swap cage for three discs is fitted 64, 128 and 256MB ECC SDRAM upgrades (single DIMM) 4/8GB* DDS2 DAT, 12/24GB* DDS3 DAT (internal) 120GB DDS3 DAT Stacker (external) 4/8GB* SLR5 (internal) 20/40GB* DLT 4000 (internal and external) 35/70GB* DLT 7000 (external) Ultra2 SCSI Disk Node (in Rack) Cluster Kit UPS with driver/control software Asynchronous host adapter with 4 and 8 x RS-232/423 port adapter options and High Connectivity (RIO) asynchronous host adapter V.24 synchronous communications controller Indicates compression ratio of 2:1

	Server Management
	Servermanager SNMP-based suite DMI-conformant BIOS

	Security
	Lockable internal access, BIOS-controlled password access to system, discs and exchangeables

	Operating System Support
	Windows NT® Server 4.0 (with full approvals and certification) SCO® UnixWare(tm)7 (with full approvals and certification) NetWare® 4.11 (IntranetWare®), NetWare 4.2/5 (with full approvals and certification) SCO OpenServer( 5.0.5 RedHat Linux 6.0 and SuSe Linux 6.1 validated Microsoft Cluster Server certified

	Approvals
	Safety: IEC 950 Amendment 4 (CB report obtained) and national variants: EN60950 Amendment 4: 1995, for EU directive 73/23/EEC (includes the requirements for European Telecom safety) European UL 1950 Edition 3: 1995 US CAN/CSA C22.2 No. 950 1995 Canadian NEMKO-TSE(74-SEC)207/94 Norwegian EMC: EN50081-1 calling up EN 55022 Class A European Radiated EN50082-1 calling up EN61000-4-2,3,4,5,6,11 for EU directive 89/336/EECEuropean Immunity VCCI Class 1Japanese EMC FCC Pt. 15 subpart B, class AUS EMC Marks applied at Release: CE, FCC Marks applied for GS, N

	Operating Conditions
	Ambient temperature: 5-35oC operating; -10-60oC non-operating Humidity: 20-80% non-condensing Noise: <40 dB bystander sound pressure Mains input: 100-120V, 200-240V, 50-60Hz Power consumption: 280 Watts max.

	Dimensions and weight
	HeightxWidthxDepth: 440x218 (excl. feet) x500mm Weight: 12kg

	Standard Warranty
	Please check with Fujitsu Technology Solutions Computers or your Supplier for local details

	Server Configurations
	Typical Server configuration: 128MB ECC Reg. SDRAM Memory, RAID Controller and 3-5x 9.1GB Ultra-2 SCSI hard disc drives To allow full flexibility, all servers are available without memory and hard disc drive:C800i - 0MB RAM, 0GB HDD All configurations are available as rack-mounted.

Fujitsu is a registered trademark of Fujitsu Ltd. Pentium is a registered trademark and MMX is a trademark of Intel Corporation. Microsoft, Windows NT and Windows 95 are registered trademarks of Microsoft Corporation in the United States and in other countries. This Product Specification does not constitute a warranty, nor does it form part of a contract or licence with Fujitsu Computers Limited trading as Fujitsu Technology Solutions.