teamserver L800i Configuration

Fujitsu Technology Solutions certifies that the teamserver L800i has been tested to show that Red Hat 6.0 and S.u.S.E. 6.1 distributions of Linux install and operate correctly using the following configurations

Processors

• Single/Quad Pentium II Xeon
• Single/Quad Pentium III Xeon

Memory

• Minimum tested: 64MB ECC SDRAM
• Maximum tested: 2GB ECC SDRAM

LAN Adapters

• Intel EtherExpress PRO/10+ Adapter
• Intel EtherExpress PRO/100+ Server Adapter

SCSI Adapters

• On-board Symbios SCSI Adapter
• Adaptec AHA2940UW Single-Ended Single-Channel PCI SCSI Adapter
• Adaptec AHA2940U2W Ultra2 PCI SCSI Adapter
• Adaptec AHA2940UW Single-Ended Single-Channel PCI SCSI Adapter v1.32
• Mylex eXtremeRAID PCI RAID Adapter
• Mylex AcceleRAID v4.10.38, 4.06-0-60 PCI Adapter

Video Adapter

• On-board Cirrus Logic GD5840 chipset, 2MB

Disks

• 4GB 1" 7200 rpm SCA Ultra2/LVD SCSI
• 9GB 1" 7200 rpm SCA Ultra2/LVD SCSI
• 9GB 1" 10000 rpm SCA Ultra2/LVD SCSI
• 18GB 1" 7200 rpm SCA Ultra2/LVD SCSI
• 18GB 1.6" 7200 rpm SCA Ultra2/LVD SCSI
• 18GB 1" 10000 rpm SCA Ultra2/LVD SCSI
• 36GB 1.6" 10000 rpm SCA Ultra2/LVD SCSI

Disk Node

• teamserver 800i series disk node

Tape Storage Devices

• 4/8GB Internal SLR5 QIC tape drive
• 4/8GB Internal DDS-2 4mm DAT tape drive
• 12/24GB Internal DDS-3 3mm DAT tape drive
• 20/40GB Internal DLT4000 tape drive
• 20/40GB External DLT4000 tape drive
• 35/70GB External DLT7000 tape drive [autoloader NOT tested]